Battery Charger HF
Three-Phase R0MEO 5.0

(upcoming in 2024)

All the three-phase R0MEO 5.0 battery chargers have full switching technology with microcontroller digital control. They are flexible and reliable devices.

The high efficiency of the battery chargers assures a remarkable energy saving optimizing the economic benefits and permitting to amortize the investment for the selection of high frequency in a short time.

They are suitable for the recharge of all kind of batteries (lead-acid, gel, sealed, AGM batteries, etc…) and allow selecting a specific charge curve or configuring easily a suitable curve for the type of battery. They are characterized by a negligible residual output ripple.

The battery chargers integrate the input and output protections and are equipped with an over-temperature.

They have a wholly programmable control unit, easy-to-use thanks to the user-friendly graphic interface displaying all the charge parameters, the alarms, the data plate and all general information concerning the device.
These kind of battery chargers are equipped with a monochromatic graphic LCD display/LED.

Battery Charger HF – Three Phase – R0MEO 5.0

Battery Charger HF – Three Phase – R0MEO 5.0

Battery Charger HF – Three Phase – R0MEO 5.0

Battery Charger HF – Three Phase – R0MEO 5.0

Battery Charger HF – Three Phase – R0MEO 5.0

Battery Charger HF – Three Phase – R0MEO 5.0

Technical Characteristics

400 Vca ± 15%, 3ph

50 – 60 Hz

> 90%

0 to + 50 °C

0 A, if network electrically bonded

Yes, fuse

Yes, fuse

Yes

Yes, fuses and varistors

Programming and settings at will – default IU IA

Monochromatic 2×16 LCD display – LED

Yes, multicolours

Yes

2, configuration at will (mains presence, finished charge, control pump, etc…)

Forced air circulation

Metallic

570 x 400 x 150 mm

12 kg

IP20

In conformity with the Low Voltage Directive 73/23/CEE and the EMC Directive 89/336/CEE and their successive amendments.